描述
一、UNIKA UNIDRALL5100 高动态性能信号传输电缆全系列电缆应用概述
| 电缆系列 | UNIKA UNIDRALL5100 |
| 电缆类别 | 高动态性能信号传输电缆 Signal transmission cables with high dynamic performances |
| 典型特征 |
这些电缆用于机床、装配线和生产线等中伺服电机的控制，通过来自编码器、旋转变压器和转速计的信号。屏蔽经过优化，以最大限度地减少来自其他电缆和电子设备的电磁干扰。电缆中使用的聚氨酯护套化合物符合UL和CSA标准的要求，提供出色的耐磨性、耐油性和一般化学品性。它们适用于安装在具有高机械性能的电缆载体中。曲库中提供的UNTRALL 5100电缆包括伺服电机应用的最常见类型。对于特定应用，我们鼓励您与我们联系以获取更多信息。DESINA批准。UL/CSA批准：90°C 300V样式21209 90°C 30V样式20671。
These cables are used for the control of servomotors in machine tools, assembly lines, and production lines, etc., through signals from encoders, resolvers, and tachometers. The shielding is optimized to minimize electromagnetic interference from other cables and electronic devices. The polyurethane jacket compound used in the cables meets the requirements of UL and CSA standards, providing excellent resistance to abrasion, oils, and general chemicals. They are suitable for installation in cable carriers with high mechanical performance. The UNIDRALL 5100 cables, available in the catalog, include the most common types for servomotor applications. For specific applications, we encourage you to contact us for further information. DESINA Approved. UL/CSA Approved: 90°C 300V style 21209 90°C 30V style 20671.
|
二、UNIKA UNIDRALL5100 电缆外观图 | 截面图
三、UNIKA UNIDRALL5100 订购列表
| 订货编号 | 芯数×截面积 | 外径 | 铜质量 kg/km | 电缆质量 kg/km |
|---|---|---|---|---|
| 3F002T | (10x2x0,18) | | | DIN 47100 |
四、UNIKA UNIDRALL5100 技术规格
| Dati tecnici | Technical data | |
|---|---|---|
| 1Dati tecniciConduttore extra flex Extra flex conductor |
Rame rosso o stagnato secondo CEI EN 60228 |
Tinned or bare copper complying with CEI EN 60228 |
| 2Isolamento ed Identificazione anime di potenza lation and power core identification |
TPO anime colorate con codice personalizzato |
TPO coloured cores with customized code |
| 3Schermatura totale Overall shielding |
Treccia di fili di rame stagnato. Copertura maggiore 85% |
Tinned copper wire braid. Coverage above 85% |
| 4Guaina Jacket Jacket |
PUR secondo UL 1581 and C22.2 18 Colore verde RAL 6018 |
11 according to UL1581 ar n210. Colour green RAL 60 |
| Tensione di lavoro Operating voltage |
30÷300 V | 30÷300 V |
| Resistenza di isolamento Insulation resistance |
2 | 2 |
| Temperatura di lavoro Operating temperature |
Posa fissa -50 : 90 C Posa dinamica in catena -30 + 90 C |
Fixed application -50 90 C Dynamic application into chain -30 90 C |
| (mm) Speed [m/min] |
300 | 300 |
| Accelerazione/ decelerazione [m/s2] Acceleration/ deceleration [m/s2] |
40 | 40 |
| Numero di cicli Number of cycles |
15 milioni | 15 Mio |
| Raggio minimo di curvatura Minimum bending radius |
Posa fissa 5 x diametro esterno Posa dinamica in catena 5 x diametro esterno |
Fixed application 5 x outer diameter Dynamic application into chain 5 x outer diameter |
| Comportamento al fuoco Fire behaviour |
Prova di non propagazione fiamma UL 758 e prova FT1 22 C.22.2 n 210 |
Cable flame test per UL 758 and FT1 test per CSA C.22.2 10 |
| Emissione gas alogenidrici Halogen gas emission |
0,5% IEC 60754 | 0,5% IEC 60754 |
| Resistenza al fango Mud resistance |
IEC 60092-360 annex C NEK TS 606:2016 |
IEC 60092-360 annex C NEK TS 606:2016 |
| Resistenza agli oli industriali Industrial oil resistance |
EN 50363-10-2 | EN 50363-10-2 |
| Resistenza raggi UV UV resistant |
Resistente ai raggi UV secondo UL 758 sec.17 |
UV resistant according to UL 758 sec.17 |
| Assorbimento d’acqua Water absorption |
EN 50363-10-2 | EN 50363-10-2 |
评价
目前还没有评价