描述
一、UNIKA SH-CI-IC-A-F S95 控制和仪表,单独和集体屏蔽,装甲防火船用电缆额定全系列电缆应用概述
| 电缆系列 | UNIKA SH-CI-IC-A-F S95 |
| 电缆类别 | 控制和仪表,单独和集体屏蔽,装甲防火船用电缆额定 Control and instrumentation, individually and collectively screened, armoured fire resisting shipboard cables rated |
| 典型特征 |
-15°C-50°C根据IEC 60811 6D:D是总直径IEC 60332-3-22不火传播IEC 60332-1-2不火传播IEC 60331-21,IEC 60331-1(2)防火IEC 60754-1卤素含量IEC 60754-2 pH和电导率IEC 60684-2氟含量IEC 61034烟雾排放根据UL 758抗紫外线(建议在直接接触咸水或打猎的情况下提供保护)根据UL 758抗紫外线,根据IEC 60092-360标签耐油。9-10、咸水、风化
-15°C -50°C according to IEC 60811 6D: D is the overall diameter IEC 60332-3-22 not fire propagation IEC 60332-1-2 not flame propagation IEC 60331-21, IEC 60331-1 (2) fire resistant IEC 60754-1 halogen content IEC 60754-2 pH and conductivity IEC 60684-2 fluorine content IEC 61034 smoke emission UV resistant according to UL 758 (protection reccomended in case of direct contact with salty water or nebulation) UV resistant according to UL 758, oil resistant according to IEC 60092-360 tab. 9-10, salty water, weathering
|
二、UNIKA SH-CI-IC-A-F S95 电缆外观图 | 截面图

三、UNIKA SH-CI-IC-A-F S95 订购列表
| 订货编号 | 芯数×截面积 | 外径 | 铜质量 kg/km | 电缆质量 kg/km |
|---|---|---|---|---|
| NH2C5S | 2x2x0,75 | 12,3 | 107 | 207 |
| NH4T5S | 4x3x0,75 | 16,2 | 241 | 433 |
| NH3Q5S | 3x4x0,75 | 15,5 | 106 | 441 |
| NH4C5S | 4x2x0,75 | 14,8 | 198 | 307 |
| NH7T5S | 7x3x0,75 | 19,6 | 351 | 634 |
| NH5Q5S | 5x4x0,75 | 19,2 | 173 | 630 |
| NH7C5S | 7x2x0,75 | 17,6 | 282 | 493 |
| NHBT5S | 12x3x0,75 | 25,9 | 543 | 990 |
| NH7Q5S | 7x4x0,75 | 21,0 | 240 | 791 |
| NHAC5S | 10x2x0,75 | 22,4 | 385 | 685 |
| NH4T6S | 4x3x1 | 16,9 | 287 | 492 |
| NH3Q6S | 3x4x1 | 17,7 | 288 | 502 |
| NHCC5S | 14x2x0,75 | 24,3 | 480 | 865 |
| NH7T6S | 7x3x1 | 20,2 | 427 | 726 |
| NH5Q6S | 5x4x1 | 21,3 | 414 | 711 |
| NHDC5S | 19x2x0,75 | 27,1 | 603 | 1086 |
| NHBT6S | 12x3x1 | 26,7 | 669 | 1162 |
| NH7Q6S | 7x4x1 | 23,4 | 524 | 912 |
| NHFC5S | 24x2x0,75 | 31,9 | 745 | 1359 |
| NH4T7S | 4x3x1,5 | 19,6 | 370 | 606 |
| NHGC5S | 30x2x0,75 | 34 | 878 | 1611 |
| NH7T7S | 7x3x1,5 | 23,5 | 559 | 917 |
| NH5Q7S | 5x4x1,5 | 25,0 | 543 | 916 |
| NHHC5S | 37x2x0,75 | 37,2 | 1150 | 2022 |
| NHBT7S | 12x3x1,5 | 31,3 | 885 | 1470 |
| NH7Q7S | 7x4x1,5 | 27,4 | 696 | 1145 |
| NH2C6S | 2x2x1 | 12,7 | 126 | 239 |
| NH4C6S | 4x2x1 | 15,2 | 233 | 389 |
| NH7C6S | 7x2x1 | 18,1 | 340 | 574 |
| NHAC6S | 10x2x1 | 23,2 | 467 | 803 |
| NHCC6S | 14x2x1 | 25,3 | 592 | 993 |
| NHDC6S | 19x2x1 | 28,2 | 752 | 1009 |
| NHFC6S | 24x2x1 | 33,2 | 931 | 1608 |
| NHGC6S | 30x2x1 | 35,7 | 1214 | 1981 |
| NHHC6S | 37x2x1 | 38,6 | 1436 | 2383 |
| NH2C7S | 2x2x1,5 | 15,1 | 198 | 284 |
| NH4C7S | 4x2x1,5 | 17,5 | 294 | 479 |
| NH7C7S | 7x2x1,5 | 21 | 435 | 701 |
| NHAC7S | 10x2x1,5 | 26,9 | 599 | 994 |
| NHCC7S | 14x2x1,5 | 29,4 | 766 | 1259 |
| NHDC7S | 19x2x1,5 | 33 | 979 | 1606 |
| NHFC7S | 24x2x1,5 | 39,4 | 1333 | 2127 |
| NHGC7S | 30x2x1,5 | 41,8 | 1580 | 2521 |
| NHHC7S | 37x2x1,5 | 45,3 | 1876 | 3009 |
四、UNIKA SH-CI-IC-A-F S95 技术规格
| Dati tecnici | Technical data | |
|---|---|---|
| Conduttore Conductor Isolamento Insulation |
Dati tecnici Rame rosso (opzionale stagnato) classe 5 in accordo alla IEC 60228 Mescola di silicone S95 in accordo alla IEC 60092-360 Spessori in accordo alla IEC 60092-353 |
Technical data Bare (optional tinned copper) class 5 IEC 60228 Silicon compound S95 according to IEC Thickness according to IEC 60092-353 |
| Identificazione anime (preferenziale) Core identification (preferential) |
Coppie: nero, bianco con numerazione 1-1, 2-2, 3-3, … Terne: nero, bianco, rosso con numerazione 1-1-1, 2-2-2, 3-3-3, Quarte: nero, bianco, rosso, blu con numerazione 1-1-1-1, 2-2-2- Quad: 3-3-3-3, … |
Quad: black, white, with numbers 1-1-1-1, 2-2-2-2, Triple: black, white, red with numbers …. NH4C6S4x2x115,2233389 Quad: black, white, red, blue with numbers 2-2-2-2, 3-3-3-3, … |
| Riunitura anime Single core assembly |
Anime assemblate a coppie, terne o quarte (unità)Each | Anime core assembled forming pairs or quads (unit) |
| quads (unit)Schermatura individuale Individually screen on each unit Cavi totale Unit assembly |
Nastro Alluminio/Poliestere + drain wire (eventuale treccia in fili di rame rosso o stagnato) Ogni unità riunita assieme a filati riempitivi e nastri non Nastri |
Aluminium/polyester tape with drain bare or tinned copper wire braid) All cores or units assembled in round suitable fillers and non hygroscopic tape(s) |
| Schermatura totale Collective screen |
Nastro Alluminio/Poliestere + drain wire | Aluminium/polyester tape with drain wire |
| Nastratura Inner covering |
Nastri non igroscopiciNon | non hygroscopic tape(s) |
| Armatura Armouring |
Treccia di rame rosso (su richiesta rame stagnato o acciaio zincato). Copertura minima 90% |
Bare copper (upon request tinned copper steel wire braid). Minimum coverage 90% |
| Guaina esterna Outer Sheath |
Compound SHF1 (e optional SHF2) in accordo alla IEC 60092- 360 Spesori in accordo alal IEC 60092-376 Colore: arancio (o altri colori concordati) Diametro esterno in accordo alla IEC 60092-350 annesso D |
Compound SHF1 (and optional SHF2) according Compound Thickness according to IEC 60092-376 Colour: orange (or other colour agreed) Outer diameter according to IEC 60092-350 |
| Marcatura Marking |
Diametro cavo > 20 mm: UNIKA (Italy) – SH-CI-IC-A-F S95 150/250 V 95°C (la versione SHF2 è marcata “SHF2”) (nr anime) x (nr unità) x (sezione) IEC 60092-376 – IEC 60332-3-22 – IEC 60331-21 – IEC 60331-1 – traceability code Diametro cavo 20 mm: UNIKA (Italy) SH-CI-IC-A-F S95 150/250 V 95°C (la versione SHF2 è marcata “SHF2”) (nr anime) x (nr unità) x (sezione) – IEC 60092-376 – IEC 60332-3-22 IEC 60331-21 IEC 60331-2 traceability code |
Cable diameter > 20mm: UNIKA (Italy) SH-CI-IC-A-F S95 150/250 V is marked SHF2 (n cores) x(n units) x IEC 60092-376 – IEC 60331 IEC 603 – traceability code Cable diameter 20mm: UNIKA (Italy) SH-CI-IC-A-F S95 150/250 V SHF2 marked "SHF2")(n cores) x (n units) Xi IEC 60092-376 – IEC 60332-3-22 – IEC 60331 – traceability code |
| Temperatura per posa fissa Rated conductor temperature for fixed installation |
95C | 95C |
| Temperatura minima SHF1 d’installazione Minimum installation SHF2 option temperature |
-15C -50°C according to IEC 60811 |
-15C -50°C according to IEC 60811 |
| Raggio minimo di curvatura Minimum bending radius |
6D: D è il diametro esterno6D: | 6D: D is the overall diameter |
| Comportamento al fuoco Fire behaviour |
IEC 60332-3-22 non propagante il fuoco IEC 60332-1-2 non propagante la fiamma IEC 60331-21, IEC 60331-1 (2) resistente al fuoco IEC 60754-1 assenza di alogeni IEC 60754-2 acidità dei fumi IEC 60684-2 contenuto di fluoro IEC 60754-2 acidità dei fumi |
IEC 60332-3-22 not fire propagation IEC 60332-1-2 not flame propagation IEC 60331-21, IEC 60331-1 (2) fire resistant IEC 60754-1 halogen content IEC 60754-2 pH and conductivity IEC 60684-2 fluorine content IEC 61034 smoke emission |
| SHF1 Resistenze chimiche Chemical resistant SHF2 option |
resistente ai raggi UV secondo UL 758 (protezione raccomandata in caso di contatto con acqua salata o nebulizzazione) resistente ai raggi UV secondo UL 758, resistente all’olio secondo IEC 60092-360 tab. 9-10, acqua salata, agenti atmosferici |
UV resistant according to UL 758 (protection reccomended in case of direct contact with salty water or nebulation) UV resistant according to UL 758, oil according to IEC 60092-360 tab. 9-10, weathering |

评价
目前还没有评价