UNIKA SH-CI-IC-A船用安装电缆技术规格、选型及订购


SKU: SH-CI-IC-A SERIES

符合IEC 60811 6D的90°C-15°C-50°C:D是总直径IEC 60332-3-22不火传播IEC 60332-1-2不火传播IEC 60754-1卤素含量IEC 60754-2 pH和电导率IEC 60684-2氟含量IEC 61034烟雾排放符合UL 758的抗紫外线(建议在直接接触咸水或雾化的情况下提供保护)符合UL 758的抗紫外线,符合IEC 60092-360标签的耐油

描述

一、UNIKA SH-CI-IC-A 控制和仪表,单独和集体屏蔽,额定150/250V(300V)装甲船用电缆全系列电缆应用概述

电缆系列 UNIKA SH-CI-IC-A
电缆类别 控制和仪表,单独和集体屏蔽,额定150/250V(300V)装甲船用电缆
Control and instrumentation, individually and collectively screened, armoured shipboard cables rated 150/250V (300V)
典型特征
符合IEC 60811 6D的90°C-15°C-50°C:D是总直径IEC 60332-3-22不火传播IEC 60332-1-2不火传播IEC 60754-1卤素含量IEC 60754-2 pH和电导率IEC 60684-2氟含量IEC 61034烟雾排放符合UL 758的抗紫外线(建议在直接接触咸水或雾化的情况下提供保护)符合UL 758的抗紫外线,符合IEC 60092-360标签的耐油
90°C -15°C -50°C according to IEC 60811 6D: D is the overall diameter IEC 60332-3-22 not fire propagation IEC 60332-1-2 not flame propagation IEC 60754-1 halogen content IEC 60754-2 pH and conductivity IEC 60684-2 fluorine content IEC 61034 smoke emission UV resistant according to UL 758 (protection reccomended in case of direct contact with salty water or nebulation) UV resistant according to UL 758, oil resistant according to IEC 60092-360 tab. 9-10, salty water, weathering

二、UNIKA SH-CI-IC-A 电缆外观图 | 截面图

SH-CI-IC-A电缆外观图.webp
SH-CI-IC-A电缆外观图.webp

三、UNIKA SH-CI-IC-A 订购列表

单位:mm
订货编号 芯数×截面积 外径 铜质量 kg/km 电缆质量 kg/km
NFW00 2x2x0,75 11,3 100 188
NFW27 4x3x0,75 14,8 227 328
NFW36 3x4x0,75 17,3 260 309
NFW01 4x2x0,75 12,9 149 287
NFW28 7x3x0,75 17,6 333 534
NFW37 5x4x0,75 21,2 366 520
NFW02 7x2x0,75 15,8 266 393
NFW29 12x3x0,75 23,2 517 816
NFW38 7x4x0,75 23,5 453 655
NFW03 10x2x0,75 20,1 363 653
NFW30 4x3x1 15,5 275 377
NFW39 3x4x1 16.2 275 422
NFW04 14x2x0,75 21,7 456 749
NFW31 7x3x1 18,5 412 627
NFW40 5x4x1 19.7 398 602
NFW05 19x2x0,75 24,2 576 935
NFW32 12x3x1 24,2 648 992
NFW41 7x4x1 21.4 506 764
NFW06 24x2x0,75 28,5 712 1189
NFW33 4x3x1,5 17,9 355 52
NFW42 3x4x1,5 18,8 356 531
NFW07 30x2x0,75 30,4 844 1412
NFW34 7x3x1,5 21,5 540 796
NFW43 5x4x1,5 22,9 524 784
NFW08 37x2x0,75 23,9 1002 1690
NFW35 12x3x1,5 28,6 859 1279
NFW44 7x4x1,5 25,1 674 992
NFW09 2x2x1 11,8 120 207
NFW10 4x2x1 14,1 222 305
NFW11 7x2x1 16,8 327 505
NFW12 10x2x1 21,2 449 703
NFW13 14x2x1 23,1 572 883
NFW14 19x2x1 25,8 729 918
NFW15 24x2x1 30,3 904 1416
NFW16 30x2x1 32,1 1079 1685
NFW17 37x2x1 34,7 1289 2013
NFW18 2x2x1,5 14,0 188 241
NFW19 4x2x1,5 16,1 280 423
NFW20 7x2x1,5 19,4 418 621
NFW21 10x2x1,5 24,8 577 873
NFW22 14x2x1,5 26,8 742 1122
NFW23 19x2x1,5 30,2 952 1429
NFW24 24x2x1,5 36,0 1289 1806
NFW25 30x2x1,5 38,0 1533 2149
NFW26 37x2x1,5 41,3 1825 2556

四、UNIKA SH-CI-IC-A 技术规格

Dati tecnici Technical data
Conduttore
Conductor
Rame rosso (opzionale stagnato) classe 5
in accordo alla IEC 60228
Bare (optional tinned copper) class 5
according to IEC 60228
Isolamento
Insulation
Mescola HF XLPE in accordo alla IEC 60092-360
Spessore in accordo alla IEC 60092-376
-50°C XLPE compound according to IEC 60811
Thickness according to IEC 60092-376
Identificazione anime
(preferenziale)
Core identification
(preferential)
Coppia: nero, bianco numerati 1-1, 2-2, 3-3,
Quarta: nero, bianco, rosso, blu numerati 1-1-1-1, 2-2-2-2, 3-3-
3-3, …
Pair: black, white with numbers1-1, 2-2,
Triple: black, white, red with numbers
NFW287x3x0,7517,6333534
Quad: black, white, red, blue with numbers
2-2-2-2, 3-3-3-3, …
Riunitura anime
Single core assembly
Anime riunite a formare coppie o terne o quarteEach Anime core assembled forming pairs or
quads (unit)
quads (unit)Schermatura individuale
Individual screen
on each unit
Nastro Alluminio/Poliestere + drain wire (eventuale treccia in fili
di rame rosso o stagnato)
Aluminium/polyester tape with drain
bare or tinned copper wire braid)
Riunitura totale
Unit assembly
Ogni unità riunita assieme a filati riempitivi e nastri non
Nastri
All cores or units assembled in round
suitable fillers and non hygroscopic tape(s)
Schermatura totale
Collective screen
Nastro Alluminio/Poliestere + drain wire Aluminium/polyester tape with drain
Nastratura
Taping
Nastri non igroscopiciNon non hygroscopic tape(s)
Cavi
Armouring
Treccia di rame rosso (su richiesta in acciaio stagnato o zincato).
Copertura minima 90%
Bare copper (upon request tinned copper
galvanized steel) wire braid.
Minimum coverage 90%
Guaina esterna
Outer sheath
Compound SHF1 (e optional SHF2) in accordo alla IEC 60092-
NFW24 24x2x1,536,012891806
Spessore in accordo alla IEC 60092-376
Colore: grigio (preferenziale)
Diametro esterno in accordo alla IEC 60092-350 – Allegato D
Compound SHF1 (and optional SHF2)
IEC 60092- 360
Thickness according to IEC 60092-376
Colour: grey (or other colour agreed)
Outer diameter according to IEC 60092-350
Marcatura
Marking
UNIKA (Italy) – SH-CI-IC-A 150/250V 90C (Ia versione SHF2 e
marcata SHF2
numero anime) x (numero unita) x (sezione) – lEC 60092-376
IEC 60332 -3-22 – codice rintracciabilità
UNIKA (Italy) – SH-CI-IC-A 150/250 V 9t
version is marked “SHF2”)
(n cores) x (n units) x (cross-section.
376 – IEC 60332-3-22 – traceability code
Temperatura per posa fissa
Rated conductor temperature
for fixed installation
90C 90C
Temperatura minima
SHF1
d’installazione
Minimum installation
SHF2
temperature
option
-15C
-50°C according to IEC 60811
-15C
-50°C according to IEC 60811
Raggio minimo di curvatura
Minimum bending radius
6D: D è il Ø esterno del cavo6D: 6D: D is the overall diameter
Comportamento al fuoco
Fire behaviour
IEC 60332-3-22 non propagante il fuoco
IEC 60332-1-2 non propagante la fiamma
IEC 60754-1 assenza di alogeni
IEC 60754-2 acidità dei fumi
IEC 60684-2 contenuto di fluoro
IEC 60754-2 acidità dei fumi
IEC 60332-3-22 not fire propagation
IEC 60332-1-2 not flame propagation
IEC 60754-1 halogen content
IEC 60754-2 pH and conductivity
IEC 60684-2 fluorine content
IEC 61034 smoke emission
SHF1
Resistenze chimiche
Chemical resistant
SHF2
option
resistente ai raggi UV secondo UL 758 (protezione
raccomandata in caso di contatto con acqua salata o
nebulizzazione)
resistente ai raggi UV secondo UL 758, resistente all’olio
secondo IEC 60092-360 tab. 9-10, acqua salata, agenti
atmosferici
UV resistant according to UL 758 (protection
reccomended in case of direct contact
with salty water or nebulation)
UV resistant according to UL 758, oil
according to IEC 60092-360 tab. 9-10,
weathering

其他信息

重量 N/A

评价

目前还没有评价

成为第一个“UNIKA SH-CI-IC-A船用安装电缆技术规格、选型及订购” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

相关产品